Denny Dart Mk II can be printed on a single 8 1/2″ x 11″ sheet, but that is not necessary. It is simple enough that you can lay it out in pencil on your covering and glue the sticks on. With tissue, you can put the pencil drawing under wax paper or plastic film, put the tissue over the covered drawing and glue the sticks to the paper. It uses the 12″ AMA Cub fuselage stick and 1/16″ x 1/8″ sticks for the surfaces. A 5 1/2″ Sig prop, 6″ MPC prop or 7″ North Pacific prop may be used. Flat span is 15″, with dihedral tips, projected span is 14 5/16″. It will easily do 2 to 3 minutes outdoors. Put your name and phone number on the stick.
Plan and instructions may be found here: http://www.theplanpage.com/st.htm
Turn the wing around. The trailing edge should ALWAYS be longer than the leading edge.
Dick Baxter dbaxter554@gmail.com